wallys Network_Card/DR9074-2.4G-PN01.1-Wifi-6-Qualcomm-QCN9074-Single-Band-2.4-GHz-4T4R-M.2-E-Key-Interface-802.11ax

BY Wallys Communications (Suzhou) Co LTD

EMAIL:sales@wallystech.com

WEB:https://www.wallystech.com/

wifi6 router

wifi 6E

Wi-Fi 6E

Wi-Fi 6

WiFi 6

802.11ax

802.11ac

wireless

QCN9074/QCN9024/QCN9072/QCA9882/QCA9880

IPQ6010/IPQ6018/IPQ6000/IPQ8072/IPQ5018/IPQ8074

IPQ4029/IPQ4019

Dipole Antenna

pannel antenna

Smart antenna

omni antenna

Wireless Access Point

DR9074-2.4G(PN01.1)

QCN9074 802.11ax 4x4 MU-MIMO 2.4GHz wifi6

QCN9074 11ax 4x4 2.4G M.2

Features

■ Qualcomm Atheros QCN9074

■ 2.4GHz, max 23dBm per chain, up to 1147Mbps

■ Single Band 2.4GHz 4x4 WiFi 6 (802.11ax

■ 4 spatial streams (4SS)

■ M.2 E Key Interface

■ PCI Express 3.0 Interface

Absolute Maximum Rating

Parameter	Rating	Unit
Operating Temperature Range	-20 to 70	ºC
Storage Temperature Range	-40 to 90	ºC
Operating Humidity Range	5 to +95 (non-condensing)	%
Storage Humidity Range	0 to +90 (non-condensing)	%

Hardware Specifications

Symbol	Parameter
Chipset	Qualcomm Atheros QCN9074
WLAN Host Interface	PCI Express 3.0 Interface
System Memory	2Mbit serial I²C bus EEPROM
Standard Operating Voltage	5V
Operating Systems	QSDK
Host Interface	M.2 E Key
Antenna Cable / Port	4 x MMCX Connectors,4T4R
Frequency Range	2.412GHz-2.472GHz
Data Rates for WALN	2.4GHz, max 23dBm per chain, up to 4949Mbps
Channel Spectrum Widths for WLAN	Support 20/40MHz at 2.4GHz
Modulation Techniques	OFDMA: BPSK, QPSK, DBPSK, DQPSK,16-QAM, 64-QAM, 256-QAM,1024-QAM
Temperature Range	Operating: -20°C to 70°C, Storage: -40°C to 90°C
Humidity	Operating: 5% to 95% (non-condensing), Storage: Max. 90% (non-condensing)
Certification	TBD
Power Consumption	TBD
Reference Design	PN01.1
Dimensions (WxHxD)	57mm x 63mm x 6mm

M.2 Pin Definitions

Pin No.	Name	Pin No.	Name
1	GND	2	VDD3P3_PCIE
3		4	VDD3P3_PCIE
5		6	PCIE_LED0
7	GND	8	GPIO46_WCI2_UART_TXD_PCIE
9	TP19	10	GPIO47_WCI2_UART_RXD_PCIE
11		12
13		14
15	VDD_XPA_PCIE	16	PCIE_LED1
17	VDD_XPA_PCIE	18	GND
19	VDD_XPA_PCIE	20
21	VDD_XPA_PCIE	22
23	VDD_XPA_PCIE

33	GND	32
35	PCIE0_RX0_P	34
37	PCIE0_RX0_N	36
39	GND	38	MOD_BT_STS_2
41	PCIE0_TX0_P	40	MOD_WL_ACT_2
43	PCIE0_TX0_N	42	PINE_BT_ACT_2
45	GND	44	MOD_BT_STS
47	PCIE0_REFCLK_P	46	MOD_WL_ACT
49	PCIE0_REFCLK_N	48	PINE_BT_ACT
51	GND	50
53	PCIE0_CLKREQ_3P3_N	52	PCIE0_PERST_3P3
55	PCIE0_WAKE_3P3_N	54
57	GND	56
59	PCIE0_RX1_P	58
61	PCIE0_RX1_N	60
63	GND	62
65	PCIE0_TX1_P	64
67	PCIE0_TX1_N	66
69	GND	68
71		70
73		72	VDD3P3_PCIE
75	GND	74	VDD3P3_PCIE

Comments

Qualcomm's IPQ53XX Series: IPQ5300, IPQ5332, IPQ5322 Comprehensive Analysis

As wireless networking technology continues to evolve, Qualcomm has introduced the IPQ53XX series chipsets to meet the market’s demand for high-speed, stable, and versatile network devices. This series includes several notable models, with IPQ5300, IPQ5332, and IPQ5322 being key highlights. This article will provide a comprehensive overview of these three chips and their advantages in various networking applications. 1. IPQ5300: The Efficient Mid-Range Choice The IPQ5300 is designed for mid-range network devices and boasts the following key features: Multi-Core Architecture : Equipped with a quad-core CPU, the IPQ5300 is capable of handling network data and multitasking efficiently. WiFi 6 Support : This chip supports the 802.11ax (WiFi 6) standard, offering faster transmission speeds and lower latency, ideal for homes and small offices. Network Acceleration : Includes a built-in network acceleration engine to optimize traffic handling and device performance, ensuring a smooth us...

IPQ4018 vs IPQ5018: Comprehensive Performance Comparison

## IPQ4018 vs IPQ5018: Comprehensive Performance Comparison ### Introduction The IPQ4018 and IPQ5018 are both high-performance system-on-chip (SoC) solutions from Qualcomm, designed for wireless networking applications. This article provides a detailed comparison of these two SoCs, examining their performance, features, and suitability for different applications. ### Architecture and Processing Power #### IPQ4018 - **CPU**: Quad-core ARM Cortex-A7 - **Frequency**: Up to 717 MHz - **Process**: 28nm - **Cache**: L2 cache support #### IPQ5018 - **CPU**: Quad-core ARM Cortex-A53 - **Frequency**: Up to 1.0 GHz - **Process**: 28nm - **Cache**: Larger L2 cache compared to IPQ4018 **Comparison**: The IPQ5018 features a more advanced ARM Cortex-A53 architecture, providing better performance per clock cycle and higher overall processing power due to its increased frequency. ### Wireless Capabilities #### IPQ4018 - **Wi-Fi Standards**: 802.11ac Wave 2 - **Bands**: Dual-band (2.4GHz and 5GHz)...

Efficient application of DBDC MT7915+MT7916 in IPQ4019/IPQ4029wifi router|Wallys

Efficient application of DBDC MT7915+MT7916 in IPQ4019/IPQ4029wifi router|Wallys The difference between MT7915 and MT7916 MT7915 and MT7916 are two Wi-Fi 6 chips launched by MediaTek. Their main difference lies in the process and functional characteristics. First of all, MT7916 adopts a more advanced 6nm process, compared with MT7915 adopts 12nm process, so MT7916 has certain advantages in terms of power consumption and performance. Secondly, in terms of functional characteristics, MT7916 has the following advantages over MT7915: 1. Higher maximum rate: The maximum rate of MT7916 can reach 4.8Gbps, which is higher than 3.6Gbps of MT7915. 2. More spatial streams: MT7916 supports 8x8 MU-MIMO, while MT7915 only supports 4x4 MU-MIMO, so MT7916 has better performance when multiple users transmit data at the same time. 3. More advanced scheduling algorithm: MT7916 supports OFDMA, which can make more effective use of spectrum resources and improve network capacity and throughput. Overal...

wireless/router/wifi6/802.11ac/802.11ax

Search This Blog