Beyond Traditional Wireless Bridges: Build Your Own Long-Range Wi-Fi 6 Solution

 

Beyond Traditional Wireless Bridges: Build Your Own Long-Range Wi-Fi 6 Solution

Achieve long-range, high-bandwidth wireless connectivity without trenching fiber or paying monthly 4G/5G data fees for every remote monitoring point.

Imagine installing a surveillance camera on a pole 500 meters away from your control room.

With traditional solutions, this could mean trenching, fiber-optic installation, construction permits, and weeks of deployment time.

But for large outdoor environments such as ports, solar farms, industrial parks, agricultural facilities, and aquaculture sites, these construction costs and delays are not always necessary.

Is there a more flexible and cost-effective wireless solution that can meet industrial application requirements?

The Wallys DR5018S Wi-Fi 6 platform is designed to address these types of connectivity challenges.



1. Long-Range Wireless Connectivity: What Challenges Do Customers Face?

In large outdoor projects, cameras, sensors, and industrial devices are often distributed across wide areas. Traditional connectivity methods come with several practical limitations.

1. Fiber Deployment: High Construction Costs and Long Lead Times

  • Requires civil engineering work and construction approvals.

  • Installation and maintenance can be expensive.

  • Changes to site layouts may require additional construction.

  • Fiber damage can result in lengthy repair and service interruptions.

2. 4G/5G CPE: Recurring Operating Costs

  • Each remote connection may require its own SIM card.

  • Monthly data subscription fees add up over time.

  • Network performance depends on local signal conditions and carrier coverage.

  • Multiple devices require separate SIM and connection management.

3. Branded Wireless Bridges: Limited Flexibility

  • Established branded solutions can be relatively expensive.

  • Closed firmware can restrict further development.

  • Integration with existing customer management platforms may be limited.

  • Hardware and software configurations may not fully match specific project requirements.

4. Standard Outdoor APs: Long-Range Performance Requires Optimization

As wireless distances increase, default settings may no longer be suitable for actual link conditions.

For example, if parameters such as ACK Timeout are not properly adjusted for the transmission distance, throughput and communication stability may be affected.

2. Wallys DR5018S: A Wi-Fi 6 Platform for Long-Range Applications

Based on the Qualcomm IPQ5018 platform and running OpenWrt, the Wallys DR5018S provides a flexible foundation for long-range wireless connectivity and industrial wireless product development.

Unlike off-the-shelf wireless bridges with fixed functionality, Wallys can customize wireless parameters, software features, hardware interfaces, and device enclosures according to project requirements.

Key Technical Advantages

1. Long-Range Wireless Link Optimization

  • Adjust wireless parameters such as ACK Timeout according to actual link distances.

  • Optimize wireless configurations for different site conditions.

  • Support customized wireless transmission software development for specific projects.

2. Single-Cable PoE Deployment

  • Deliver both power and data through a single Ethernet cable.

  • Reduce power cabling complexity at remote installation points.

  • The DR5018S-Mesh version offers optional 2.5G PoE. Please confirm the required PoE configuration during product selection.

3. OpenWrt Software Platform

  • Support software development based on OpenWrt.

  • Develop dedicated network management features according to project requirements.

  • Integrate with customers' own network management platforms.

  • Provide flexibility for future feature expansion and further development.

4. OEM/ODM Hardware and Software Customization

Wallys provides more than standard wireless hardware platforms. We also support customized product development based on customer requirements, including:

  • PCB hardware design and interface customization.

  • Antenna and wireless configuration adjustments.

  • Enclosure design and product form-factor customization.

  • OpenWrt software feature development.

  • Wireless Mesh, roaming, and network management solutions.

From wireless core platforms to complete device development, Wallys can provide technical support tailored to individual project requirements.

3. Real Outdoor Testing: 730 Meters Across Three Mesh Hops, Achieving 621–631 Mbps Aggregate Throughput

Technical specifications are important, but real-world testing provides stronger evidence of performance.

In one of Wallys' outdoor tests, the DR5018S achieved approximately 730 meters of end-to-end wireless coverage across a three-hop Mesh deployment.

Using multiple concurrent iperf3 streams, the measured aggregate throughput reached:

621–631 Mbps

Please note that these figures represent aggregate throughput across multiple concurrent streams. They are not single-client speeds or individual per-hop throughput figures.

Actual performance depends on line of sight, antenna configuration, channel conditions, and device settings.

This test demonstrates the potential of the DR5018S for outdoor, multi-node wireless connectivity applications.

4. Which Industries Can Benefit from This Wireless Solution?

Ports and Container Yards

Large ports often have surveillance cameras and remote equipment distributed across extensive areas. Wireless backhaul can reduce the need for complex fiber installation and provide flexible connectivity for port security and equipment monitoring.

Solar Farms

Inverters, surveillance cameras, and monitoring equipment are often spread across large solar installations. Wireless connectivity helps establish a more flexible communication network between distributed devices.

Aquaculture and Fish Farms

For aquaculture facilities located far from shore, wireless links can connect remote surveillance cameras and sensors while reducing the need for complex cable installations.

Agriculture and Ranches

Remote irrigation controllers, livestock monitoring devices, and farm security systems can connect to a central control area through wireless networks.

5. What If Standard Wireless Bridges Cannot Meet Your Requirements?

For equipment manufacturers and companies developing their own products, choosing a wireless platform is not just about transmission distance and bandwidth. Flexibility for future product development is equally important.

For example, you may want to:

  • Develop your own branded wireless bridge instead of reselling finished products from other manufacturers.

  • Integrate a Qualcomm Wi-Fi 6 platform into existing industrial equipment.

  • Develop your own network management system using OpenWrt.

  • Customize interfaces, antennas, and enclosures to match your product requirements.

  • Obtain long-term hardware and software customization support.

These are all areas where Wallys can support your development projects.

We provide more than wireless hardware. We aim to become a long-term technology partner in your wireless product development journey.

6. Let's Discuss Your Wireless Project

If you are developing long-range wireless bridges, outdoor APs, industrial CPEs, or Mesh networking devices, or looking for a partner offering Qualcomm wireless platforms and OEM/ODM development services, we would be glad to hear from you.

To better understand your project, we would like to know:

  • Required wireless transmission distance and deployment environment.

  • Number of devices to be connected.

  • Target bandwidth and data transmission requirements.

  • Whether PoE power delivery is required.

  • Any specific hardware interface or software customization requirements.

Our team can discuss suitable wireless platforms and customized development solutions based on your project needs.

Wallys — Custom Wireless Hardware & Software Development

Qualcomm Wi-Fi 6/7/8 | OpenWrt | Industrial Wireless | Mesh | OEM/ODM

📩 sales1@wallystech.com

#WiFi6 #IndustrialWireless #OpenWrt #LongRangeWireless #WirelessBridge #PtP #MeshNetworking #OEMODM #Qualcomm #Wallys

Comments

Popular posts from this blog

Qualcomm's WiFi 7 SoCs – IPQ5322 and IPQ5424-Empower Next-Generation Wireless

Qualcomm IPQ5322 and IPQ5312 WiFi 7 Chipsets

Qualcomm IPQ5424 vs. IPQ9570: Wi-Fi 7 SoC Comparison & Positioning